|
THE BUILDING OF Little Toot 3 |
|
Finished the stern, ready for fairing and painting |
|
Laying the 300 kgs of lead and epoxy void filler in for ballast. |
|
Fairing finished over the lead, ready for painting, a LOT of sanding!!! |
|
Two coats of ‘Interprotect’ . |
|
Fitting of the Fore Deck and the forward Gunwhale |
|
Gluing in the top of the water tank and the Cooler box slides and rudder stops finished |
|
Gunwhale finished and trimmed. Building of the aft deck supports. |
|
Test fit of Engine and Thrust bearing. |
|
Forward Gunwhale completed, Cap rail fitted. Cap rail is 4 laminates of 12 mm Ply. |
|
Forward water tank flange fitted and tank painted. This tank is mainly for ballast. |
